Motion and Logic. All in

one. You can 

combine the best of 

both worlds with 

IEC 61131-3 

programming tools 

and powerful 

motion control 

software for up to 

16 axes.

ORMEC’s 

ServoWire Motion & Logic 

Controller (SMLC) product family 

provides integrated, costeffective control that leverages 

industry-standard hardware and 

software solutions.

Reduce your software 

development and support costs

by using the common “look and 

feel” of our CoDeSys software 

solution for programming 

applications using sequential 

function chart, relay ladder

logic, function block diagrams, 

instruction list and structured 

text. Use the PLCopen motion 

control library, Application 

Specific Function Blocks and

powerful ORMEC extensions 

for electronic gearing, 

camming, registration control, 

superimposed motion and 

coordinated, 

for multi-axis 

applications.

Check out our 

line-up of 

FireWirebased digital drives and servo

motors, and solutions for machine 

I/O, factory networking and HMI.

IEC 61131-3 programming and 

high performance motion for 

up to 16 axes in a single 

package.

Up to 16 servos can be daisychained and interfaced to the 

SMLC using standard IEEE1394b network interfacing and 

cabling.

Machine I/O solutions include 

Ethernet or Profibus DP.

Quality AC brushless 

servomotors offer continuous 

stall torques from 3 to 845 lbin (0.32-75 N-m)

Fully Integrated Total System Solutions…

ORMEC Systems Corp. | 19 Linden Park | Rochester, NY 14625 | phone (585) 385-3520 |www.ormec.com

Integrated Control Hardware

The ServoWire® Motion and Logic Controller

The SMLC is a cost-effective control platform offering 

rugged, industrial hardware, a proven RTOS and industry 

standard networking, programmed using standard IEC 

61131-3 languages. An SMLC system offers low cost, 

compact, proven and reliable components.

Featuring Pentium-class processors.

Two built-in Ethernet ports, two or three FireWire 

ports* (with or without screw downs), three or four 

serial ports*. 

Compact Flash program storage (eliminates hard 

disk) and 32k battery-backed SRAM data storage.

Reliable, QNX real-time operating system. 

*Model Dependent

CoDeSys Development Software

Using industrystandard IEC 

61131-3, you can 

develop a motion 

and I/O program 

using standard 

tools that 

streamline 

development and 

create application 

solutions that are 

both more effective and easier to support in the field. 

There are no software costs when using the ORMEC 

SMLC in your application. 

FireWire motion networking reduces cost & 

complexity

Control one to 16 servos directly from one controller 

without specialized motion control hardware. 

ServoWire® S2D drives are available in 200V and 

400V series. Fourteen models provide continuous 

output power from 600 watts to 24 kilowatts,

Conveniently interface a variety of Servo Motors

Mix and match servo technologies (DC brushless rotary, linear, 

DC brush-type or voice coil motors) in the same drive hardware. 

Continuous stall torques from 3 to 665 lb-in (0.32-75 N-m).

Standalone touchscreen HMIs utilize Modbus RTU 

(Serial) or Modbus/TCP (Ethernet) communications. Or 

you can utilize Windows-based HMIs such as 

Wonderware InTouch, Rockwell Automation RS View, 

Intellution iFIX, CiTect or GE Cimplicity that communicate 

with the SMLC using an OPC Server.

Select among text-based and graphical languages 

to pick the right one for the job — Relay Ladder 

Logic, Function Block Diagram, Structured Text, 

Instruction List or Sequential Function Chart 

programming. 

Program motion control and logic using standard 

IEC 61131-3 tools. 

Suite of programming languages and diagnostic 

tools streamlines development and simplifies 

support.

PLCopen standard Motion Control Library, plus

powerful ORMEC extensions, bring new levels of 

motion performance for electronic gearing, 

camming, registration control and coordinated, 

multi-axis applications

Application Specific Function Blocks are provided 

for many common motion control applications.

ServoWire® Motion & Logic Controller

Models 30, 80 & 160

ORMEC’s ServoWire Motion & Logic 

Controller (SMLC) is at the center of a 

complete machine control solution that 

can meet all of your motion, I/O and 

networking needs. By combining 

Pentium processors, IEEE 1394b 

FireWire drive networking and Ethernet 

connectivity, the SMLC is a system that 

can control your entire machine. This 

allows you to focus on your application 

instead of integrating control 

components.

The SMLC, ServoWire Drive Network, 

Modbus/TCP and Ethernet IP provide 

state-of-the-art I/O and motion control 

(for up to 16 axes), all programmed 

using any of the five IEC 61131-3 

standard languages including relay 

ladder logic.

SMLC Family of Controllers

The ServoWire Motion & Logic 

Controller (SMLC) family features high 

performance computing capability 

combined with a true real-time 

operating system (RTOS). Using the 

industry standard family of Intel 32-bit 

processors running the QNX RTOS 

provides plenty of cost effective, robust 

computing power for even the most 

demanding multi-axis motion control 

and machine control applications.

Machine I/O

The SMLC provides a multi-tiered, 

flexible approach to meeting machine 

I/O requirements. It has the ability to 

interface high-speed drive based I/O 

for microsecond position capture and 

single servo update response to sensor 

signals. It also provides submillisecond programmable limit switch 

outputs that are tightly coupled to the 

motion control.

General purpose I/O options are fully 

supported using WAGO 750 Series 

Ethernet I/O as well as optional 

Profibus DP Master support. For both 

options, a wide variety of analog and 

digital I/O modules can be cost 

effectively connected to and controlled 

by the SMLC.

SMLC 

1. Processor Options

Intel architecture microprocessor

128 Mbytes DRAM

128 Mbytes of FLASH memory for 

program storage

32 Kbytes SRAM (battery packed) 

for non-volatile data storage

2. Communication Ports

Two or three IEEE 1394b 

ServoWire (FireWire) Ports

Two Ethernet Communication 

Ports.

Three RS-232 Communication 

Connectors.

3. Input Power Supply

115/230 VAC input power (autoranging), 50/60 Hz

+5, +/-12 VDC logic power output

4. Status LEDs

Eight status LEDs on the face for 

indicating system status.

ServoWire Drive Network

ORMEC’s AC brushless servomotors 

and ServoWire digital ServoDrives

offer tested and guaranteed 

performance with the SMLC. The 

result is maximum performance from a 

tightly integrated, pre-engineered 

package that simplifies everything 

from system integration to 

maintenance.

Fully digital control offers compelling 

benefits eliminating manual 

ServoDrive setup and providing realtime software access to all 

parameters. In an SMLC system, the 

position, velocity and torque loops are 

all closed by the digital signal 

processors (DSPs) in the ServoWire 

Drives. Position update commands

are sent from the SMLC. Velocity 

observer software eliminates the need 

for analog tachometers, and 

potentiometers are eliminated since all 

gain and compensation parameters 

are set in software.

All loop adjustments are automatically

computed when a motor and its load 

inertia are specified in ServoWire Pro

greatly simplifying servo system 

tuning.

SMLC — At a Glance 

Powerful and Robust: Intel 32-bit 

processors running the QNX RTOS.

IEC 61131-3 Application 

Programming: International 

programming standard for PLCs.

PLCopen Motion Blocks: Standard 

compliant motion blocks, powerful 

ORMEC enhancements.

ServoWire: High-bandwidth, 

synchronous, all-digital ServoDrive

network based on IEEE 1394b.

Networking Options: Modbus/TCP,

OPC Server and Ethernet IP.

I/O Options: WAGO 750 Series 

Ethernet I/O and Profibus DP Master.

Size: Models 30 and 80 are 2.75” x 

7.2” x 9” (w x d x h) and Model 160 is 

4.25” x 7.2” x 9”

Specifications

General Specifications

Input Voltage: 115/230 VAC, 

1.0/0.5A (+15%, -20%), 50/60 Hz

Operating Temperature: 0 to 50°C

Relative Humidity: 10 to 95% @ 

40C (non-condensing)

Weight: Approx. 3.1/3.5 lbs 

Dimensions: Models 30 & 80 are 

2.75” x 7.2” x 9.0” (69.9 x 182.9 x 

228.6 mm), and Model 160 is 4.25” 

x 7.2” x 9.0” (108 x 182.9 x 228.6 

mm) (w x d x h)

Processor & Memory

DRAM: 128 Mbytes

Program Memory: 128 Mbytes 

(Removable Compact Flash)

Non-Volatile Memory: 32 Kbytes 

(battery backed).

Motion Control

All-digital control algorithms 

featuring velocity and acceleration 

feed-forward for optimal 

performance.

High-speed sensor inputs to initiate 

motion within one position command 

update.

High-speed hardware position 

capture is <1 µsec, ideal for use in 

high-speed registration applications.

Software controlled position, speed 

and current (torque) limits.

Drive fault protection circuits, 

watchdog timers and integrated 

diagnostics for fail-safe operation.

Full 32-bit position count or modulo 

position in user units.

SMLC Model 30 – 3 axes

SMLC Model 80 – 8 axes

SMLC Model 160 – 16 axes

Equal number of ‘virtual’ axes for each 

model

SMLC Mounting Diagrams

Inputs/Outputs

SMLC I/O: 8 inputs, 8 outputs, 1 

analog in, 1 analog out.

General I/O: 64 modules per WAGO

750 Series bus coupler, up to 512 

I/O points connected via Ethernet 

(Modbus/TCP). Multiple bus 

couplers can be used for additional 

I/O.

Profibus DP Master (optional) 

supports up to 126 I/O nodes.

Communications

Standard RS-232 serial ports

Standard Ethernet ports support

Modbus TCP/IP or Ethernet/IP.