• Show up to 2 or 4 rows, 20 characters of 

information

• Choice of Vacuum Fluorescent or 

Monochrome LCD

• Up to 16 user programmable function keys 

with slide-in legends and LED indicators

• Connection to industrial bus systems and 

Ethernet with optional modules

• IP65 front panel protection

• Version with extended operating temperature 

available

Highlights 

The CP02 HMI panels are part of the UniOP family of entry-level products. They support the rich 

common functionality of the UniOP operator panels: 

• Powerful and intuitive programming with 

the UniOP Designer 6 software 

• Support of more than 130 communication 

drivers for industrial devices 

• Optional modules for fieldbus systems 

(Profibus DP, CANopen, DeviceNet, 

Interbus) and Ethernet. Ethernet modules 

allow connection to field devices as well 

as programming the HMI from Designer. 

• Dual-driver communication capability

• Display dynamic data in numerical and 

text formats 

• Recipe data storage. Recipe data can be 

transferred to an host computer using the 

Ethernet connection. 

• Multilanguage applications. The number 

of runtime languages is limited only by the 

available memory. All text information in 

the application can be exported in Unicode 

format for easier translation. 

• Powerful macro editor to configure 

touchscreen operation 

• Alarms and historical alarm list. Alarm

and event information can be printed or 

transferred to an host computer using the 

Ethernet connection. 

• Eight level password protection. 

• Report printing to serial printer. Reports 

are freely configurable using Designer. 

• Ethernet-based UniNet network to share 

data between UniOP HMIs and to serve 

data using UniNet OPC Server. 

tn227-0.doc – 3.11.2005 

UniOP CP02F-02, CP02R-04 1

StockChec

Note 1: the operating temperature of the version –00A8 is subject to the following restrictions: 

a) the panel can be operated in the temperature range -30°C to -20°C without damages but the display 

response may be very slow. 

b) regular display response requires a temperature of -20°C or higher 

c) powering the product for a period of at least 25 minutes at an enviroment temperature of -30°C 

will ensure that the internal temperature will increase to -20°C and then proper operation of the 

display will be ensured. 

Important note: 

operating at extreme temperatures it is very important to ensure that the Relative Humidity ratings are 

not exceeded. 

The product is designed for installation in industrial environments in compliance with the regulations: 

Emitted interference EN 61000-6-4, 2001 

Noise immunity EN 61000-6-2, 2001