• Shows up to 2 or 4 rows, 20 characters 

of information

• Choice of Vacuum Fluorescent or 

Monochrome LCD

• 5 user programmable function keys 

with slide-in legends

• 5 user programmable LED indicators

• Multilanguage project capability 

• Connection to industrial bus systems 

and Ethernet with optional modules 

• IP65 front panel protection

• Version with extended operating 

temperature available

The CP HMI panels is compact low cost products yet extremely rich in functionality. The product 

support the rich common functionality of the UniOP operator panels: 

• Powerful and intuitive programming with the UniOP Designer software 

• Dual-driver communication capability (only CP01) 

• Support of more than 130 communication drivers for industrial devices 

• Optional modules for fieldbus systems (Profibus DP, DeviceNet, CANopen, Interbus) and Ethernet 

• Display data in numerical, text and bargraph format

• Recipe data storage 

• Keyboard macro editor 

• Alarms and historical alarm list 

• Eight level password protection 

Technical Data 

PN# tn197-1.doc – 26.01.2012 – Ver. 1.01

Page 3 

Fuse 2 A (user replaceable) 

Weight ~ 1.1 Kg 

Operating temperature 0 ÷ +50 °C

Storage temperature -20 ÷ +70 °C 

Operating and storage humidity 5 ÷ 85 % RH non-condensing 

Protection class IP65 (front panel) 

The product is designed for installation in an industrial environment in compliance with the regulations: 

Emitted interference EN 61000-6-4 

Noise immunity EN 61000-6-2 

Front Dimensions and Cutout 

Faceplate LxH 138×186 mm 5.43×7.32 “

Cutout AxB 117×176 mm 4.61×6.50 “

Cutout depth C 74 mm 2.91 ”

Max panel thickness 5 mm 0.20

Connections 

The product is compatible with all standard TCM and SCM modules. 

To access the slot for the modules, remove the rear cover of the product 

The backup battery is accessible for replacement after removing the main module of the unit. 

The standard programming cable CA114 can be used with CP01 units.

Indicators and keypad 

There is one dedicated LED indicator on the front panel of the unit. Function is described in the table 

below. 

A customizable legend strip is included. 

Elements not listed in this chapter are reserved for future use. 

PN# tn197-1.doc – 26.01.2012 – Ver. 1.01

The RDA mapping of all keys and LEDs is standard. 

Function keys associated to keys 1 to 5 have a slide-in legend. Legend strips in laser printable form are 

available as accessories. 

Ordering Information 

CP01R-04-0045 Compact HMI with 4×20 LCD display 

R-PRINT2299 Printable legends (5 A4 foils, 16 sets of legends per foil)